Buying guide
Tremec T56 Magnum vs TKX: Which Manual Transmission?
Short answer: TREMEC rates the T56 Magnum six-speed for 700 lb-ft and the TKX five-speed for 600 lb-ft. The TKX is lighter at 99 lb dry versus 140 lb for the Magnum and about 3 to 4 inches shorter, so it fits classic-car tunnels more easily. The Magnum adds a sixth gear with double overdrive and more torque headroom. Choose the Magnum for high-torque LS and late-model swaps, and the TKX for compact restomods comfortably under 600 lb-ft.
Tremec manual transmissions in our listings
Computed from our current listings each time this page loads. Every listing shows its own price, condition and freight.
| Type | Listings | Lowest | Median | Highest | Condition |
|---|---|---|---|---|---|
| T56 Magnum / Magnum XL | 9 | $1,985.20 | $2,069.20 | $3,254.71 | 9 new |
| TKX | 16 | $1,252.20 | $2,122.61 | $2,994.87 | 16 new |
| TR6060 | 2 | $4,234.30 | $4,251.80 | $4,269.30 | 2 refurb. |
What is the difference between the T56 Magnum and the TKX?
Both are TREMEC aftermarket manual transmissions for rear-wheel-drive swaps. The Magnum is a six-speed with two overdrive gears, based on the TR-6060 used in cars such as the Camaro, Challenger and Viper, and rated for 700 lb-ft. The TKX is a five-speed with one overdrive, rated for 600 lb-ft, and TREMEC calls it the slimmest five-speed on the market. In short, the Magnum has more torque headroom and an extra gear, and the TKX is lighter, shorter and easier to fit in older cars.
T56 Magnum vs TKX specifications
| Spec | TKX | Magnum |
|---|---|---|
| Forward gears | 5, single overdrive | 6, double overdrive |
| Torque capacity | Up to 600 lb-ft | Up to 700 lb-ft |
| Max rated rpm (service manual) | 7,500 | 7,800 |
| Dry weight | 99 lb | 140 lb (135 lb on product page) |
| Length, GM / Ford style (Silver Sport) | 30.78 in. / 31.23 in. | 34.85 in. / 34.03 in. |
| Input spline | 26 (10 on one Ford model) | 26 |
| Output spline | 31 | 31 |
| Shifter positions | 3 (forward one needs a separate shifter) | 3 (forward one needs a separate shifter) |
| Clutch release | Mechanical, convertible to hydraulic | Hydraulic (GM style) or mechanical (Ford style) |
| Bolt pattern | Ford or GM 4-speed style | T-56 style |
| Case | Ribbed 3-piece aluminum | Based on OE TR-6060 |
Which is stronger, the T56 Magnum or the TKX?
The Magnum. TREMEC rates every Magnum version, including the Magnum XL and Magnum-F, for 700 lb-ft, and every current TKX model for 600 lb-ft. Leave margin above your engine's peak torque, especially with sticky tires, a heavy car or forced induction. If your engine is near 600 lb-ft, the Magnum is the safer pick.
T56 Magnum and TKX gear ratio options
| Version | 1st | 2nd | 3rd | 4th | 5th | 6th | Rev |
|---|---|---|---|---|---|---|---|
| TKX wide ratio | 3.27 | 1.98 | 1.34 | 1.00 | 0.72 | none | 3.00 |
| TKX close ratio | 2.87 | 1.89 | 1.28 | 1.00 | 0.81 | none | 2.56 |
| TKX close ratio, 0.68 OD | 2.87 | 1.89 | 1.28 | 1.00 | 0.68 | none | 2.56 |
| Magnum 2.66 | 2.66 | 1.78 | 1.30 | 1.00 | 0.80 | 0.63 | 2.90 |
| Magnum 2.97 | 2.97 | 2.10 | 1.46 | 1.00 | 0.80 | 0.63 | 2.90 |
| Magnum 2.97, 0.50 OD | 2.97 | 2.10 | 1.46 | 1.00 | 0.74 | 0.50 | 2.90 |
Ratios are from TREMEC's TKX and Magnum service manuals. The Magnum's 0.63 sixth gear turns the engine about 12.5 percent slower than the TKX's 0.72 fifth at the same road speed, which lets you run a steeper axle ratio for acceleration and still cruise at low rpm. Pick the wide-ratio TKX or 2.97 Magnum for a taller axle or heavy car, and the close-ratio versions for a steeper axle or a high-revving engine. TREMEC's online gear ratio calculator helps match ratios to your axle and tire size.
Where does the shifter end up?
TREMEC lists three shifter positions for each, but the most forward one needs a separate front shift kit. On the TKX, Silver Sport measures the stock rear shifter at 19.52 in. from the transmission face, the stock front position at 16.75 in., and a forward kit position at 12.68 in. On the Magnum the figures are 21.05 in., 17.53 in. and 13.25 in. TREMEC says the Magnum's forward mounting provision puts the shifter about 7 3/4 in. ahead of the rear position. Measure from your bellhousing face to where the lever needs to come through the floor before you buy.
What are the Magnum XL and Magnum-F?
Both keep the Magnum's 700 lb-ft rating and ratio choices but move the shifter rearward. The Magnum-F is designed to replace T-56 transmissions in 1998 to 2002 GM F-bodies, with a shifter about 3 inches further back than the original Magnum, and it weighs 140 lb. The Magnum XL is the longest aftermarket transmission TREMEC makes, with an extended tail housing and a single direct-mount shifter position, and it weighs 150 lb. It was first offered for 2005 and later Mustangs, and TREMEC now offers a GM version. See listings for the Magnum-F and Magnum XL for Ford.
Typical swaps: LS, Ford and classic muscle cars
- LS engines: the Magnum is the common choice. Chevrolet Performance pairs its LS3 and other crate engines with a Super Magnum six-speed, and TREMEC says the Magnum-F's T-56 style pattern works with factory LS1 and LS2 bellhousings. A TKX with a GM-style pattern also suits LS builds under 600 lb-ft. See LS T56 Magnum kit and LS TKX kit listings, and LS crate engines.
- Ford engines: both are built in Ford-style versions, such as the Ford Magnum and Ford wide-ratio TKX. The Ford TCET18086 TKX uses a 10-spline input, so match the clutch disc. For modular and Coyote engines, pair the transmission with a bellhousing made for that engine. See Coyote 5.0 crate engines.
- Classic muscle cars: the TKX's 99 lb weight, shorter case and Ford or GM four-speed bolt pattern make it the easier fit in tight 1960s and 1970s tunnels. The Magnum fits where there is room and the power justifies it.
What parts does a T56 Magnum or TKX install need?
TREMEC says most swaps require changes to the driveshaft, crossmember and clutch and bellhousing arrangement. A typical parts list:
- Bellhousing: aligned with a dial indicator to TREMEC's maximum runout of .005 in.
- Clutch, flywheel and pilot bearing: with a disc that matches the input spline (26 on most units).
- Clutch release: the Magnum has a mounting pad for an OEM-style hydraulic slave. The TKX uses a mechanical release bearing retainer that can be converted to hydraulic with aftermarket systems.
- Driveshaft: Magnum units use a 31-spline slip yoke. Length must be correct and the original driveline angle kept.
- Crossmember and mount: located at the transmission's rear mount, with a rubber OEM-style mount, never solid.
- Shifter, speedometer and fluid: plan for the shifter position and speedometer signal. Magnum units ship with no oil.
Matched kits such as the small block Chevy T56 install kit cover several of these parts. Browse manual transmissions or the GM T56 Magnum and GM close-ratio TKX listings. Before ordering, read shipping, warranty terms and returns, or ask fitment questions through contact.
Which should you choose?
Choose the Magnum for engines making more than about 500 lb-ft, for late-model and LS swaps with room for a longer case, or when you want a sixth gear with a deep overdrive. Choose the TKX for classic restomods, lighter cars and engines comfortably under 600 lb-ft, where its lower weight and shorter case save fabrication. If you are also choosing an engine, see the crate engine buying guide and the LS swap guide.
Common questions
Is the T56 Magnum stronger than the TKX?
Yes. TREMEC rates the Magnum six-speed family, including the Magnum XL and Magnum-F, for up to 700 lb-ft of torque, and the TKX five-speed for up to 600 lb-ft. Choose with margin above your engine's peak torque.
How much lighter and shorter is a TKX than a T56 Magnum?
TREMEC's service manuals list the TKX at 99 lb dry and the Magnum at 140 lb dry. Silver Sport Transmissions measures the GM-style TKX at 30.78 inches long against 34.85 inches for the GM-style Magnum, about 4 inches shorter.
Will a T56 Magnum bolt up to an LS engine?
It uses a T-56 style bolt pattern, and TREMEC says the Magnum-F's pattern works with factory LS1 and LS2 bellhousings. You still need a suitable clutch and flywheel, a 31-spline slip yoke, and a crossmember and driveshaft for your car.
Does a TKX need a hydraulic clutch?
No. The TKX uses a common mechanical clutch release bearing retainer, and TREMEC says it can be converted to hydraulic release with aftermarket systems. The Magnum has a pad for an OEM-style hydraulic slave or an aftermarket guide tube.
What is the difference between the Magnum, Magnum XL and Magnum-F?
They share the 700 lb-ft rating and ratio choices but put the shifter in different places. The Magnum offers several shifter positions, the Magnum-F places it about 3 inches further back for 1998 to 2002 F-body fitment, and the Magnum XL has an extended tail housing for the most rearward position.
Does a TREMEC Magnum come filled with oil?
No. TREMEC's installation tips state that the Magnum is shipped with no oil and recommend TREMEC HP MTF, filled through the passenger-side plug until fluid reaches the plug hole.
Shop the listings
Freight, returns and the startup warranty are set out in our shipping policy, return policy and warranty terms.
Sources
The facts in this guide were checked against these pages. Makers revise specifications, so confirm critical figures with the manufacturer for your exact model.
- Chevrolet Performance (General Motors): chevrolet.com/performance-parts/crate-engines/engine-transmission-packages
- Chevrolet Performance (General Motors): chevrolet.com/performance-parts/transmissions
- Silver Sport Transmissions: shiftsst.com/blog/tremec-magnum-features-and-dimensions/313
- Silver Sport Transmissions: shiftsst.com/blog/tremec-tkx-features-and-dimensions/307
- TREMEC: tremec.com/aftermarket/products/magnum/
- TREMEC: tremec.com/wp-content/uploads/2023/05/Performance-Product-Catalog-F_TRMC_0220_V1.pdf
- TREMEC: tremec.com/aftermarket/products/tkx/
- TREMEC: tremec.com/wp-content/uploads/2023/05/TKX-Service-Manual-1.pdf
- TREMEC: tremec.com/wp-content/uploads/2024/11/Magnum-Service-Manual-Complete.pdf
- TREMEC: tremec.com/aftermarket/products/magnum-xl/
- TREMEC: tremec.com/aftermarket/products/magnum-f/
- TREMEC: tremec.com/wp-content/uploads/2023/05/TREMEC_Magnum_Installation.Tips_.pdf
- TREMEC: tremec.com/aftermarket/resources/product-support-faq/