Buying guide
Crate Engine Buying Guide: Long Block, Short Block or Turnkey?
Short answer: A short block is the block with crankshaft, rods and pistons. A long block adds the cylinder heads, camshaft and valvetrain. A dressed or turnkey engine adds most running parts, but makers such as BluePrint Engines still say not to assume it is ready to run without setup. Whatever you buy, check the included-parts list, follow the maker's break-in, and keep the paperwork its warranty requires.
Crate engine prices by make and family, from our listings
Computed from our current listings each time this page loads. Every listing shows its own price, condition and freight.
| Type | Listings | Lowest | Median | Highest | Condition |
|---|---|---|---|---|---|
| Chevrolet crate engines | 180 | $481.41 | $4,010.70 | $23,134.30 | 136 new, 6 used, 38 refurb. |
| Ford crate engines | 61 | $1,783.05 | $6,825.00 | $21,700.00 | 10 new, 4 used, 47 refurb. |
| Dodge crate engines | 53 | $1,743.18 | $8,399.30 | $22,188.87 | 3 new, 50 refurb. |
| Cummins crate engines | 4 | $4,690.00 | $10,097.50 | $14,938.00 | 4 refurb. |
| LS Crate Engines | 27 | $1,098.36 | $7,346.16 | $23,134.30 | 26 new, 1 used |
| Ford 5.0L Coyote Crate Engines | 6 | $2,742.12 | $4,902.34 | $6,089.30 | 3 new, 1 used, 2 refurb. |
| Engine & Transmission Combos | 18 | $8,329.30 | $12,179.30 | $23,134.30 | 18 new |
What is the difference between a short block, long block and turnkey crate engine?
The names describe how much of the engine is already assembled. A short block is the bottom end. A long block adds the cylinder heads and valvetrain. A dressed or turnkey engine adds most of the parts needed to run. The exact contents vary by builder and the labels are not standardized, so the parts list on each listing matters more than the name.
| Level | What it typically includes | What you usually still buy |
|---|---|---|
| Short block (GM calls its version a Partial engine) | Block and reciprocating assembly: crankshaft, rods and pistons | Heads, camshaft and valvetrain, intake, fuel and ignition, accessories |
| Long block | Short block plus cylinder heads, camshaft and valvetrain | Intake, fuel system, ignition or engine computer, water pump, exhaust manifolds, flexplate or flywheel, starter |
| Base or base dressed | GM describes its Base engine as block, crank, pistons, cam, heads and valve covers | Carburetor or injection and intake of your choice, plus accessories |
| Deluxe, fully dressed or turnkey | Most running parts. GM says its Deluxe engines ship with the distributor installed, balancer bolted on and the carburetor in the crate | Fluids, wiring, cooling, exhaust and any controller the listing does not include |
Chevrolet's LS3 long block shows how much a long block leaves out. The box contains the engine assembly, instructions and an engine registration item. It does not include a flexplate or flywheel, starter, intake manifold, fuel pump, exhaust manifolds or water pump, and it needs a separate engine control system and harness. Ford Performance's X2302E Boss 302 is another example: Ford lists it as not including the intake manifold, distributor or water pump, while the flywheel is included.
What else do I need to buy with a crate engine?
- Controls. Fuel-injected engines need a matching computer and harness. Chevrolet sells an LS control system, and Ford Performance lists a specific control pack for its Coyote crate engines.
- Fuel system. Chevrolet's LS control kit requires a constant 400 kPa (60 psi) fuel supply.
- Drivetrain parts. Flexplate or flywheel, a pilot bearing for a manual, and a bellhousing or transmission that fits the block pattern. See transmissions.
- Cooling and exhaust. Radiator, water pump if not included, thermostat, and manifolds or headers.
- Fluids. BluePrint Engines drains oil and water after its dyno test, so its engines arrive without fluids.
Engine-specific detail is in the LS swap guide. You can also shop by make: Chevrolet, Ford, Dodge, LS engines and Coyote 5.0.
Is a turnkey crate engine ready to run?
Not without setup. BluePrint Engines tells buyers not to assume its fully dressed engines are "turn key ready." It also says timing and carburetor need to be checked and tuned after shipping. Chevrolet and BluePrint both require the engine to be primed with oil before first start, and BluePrint says failure to prelube will void its warranty.
What should I check when a crate engine is delivered?
- Damage. BluePrint's installation guide says to remove the engine from its crate and check for possible shipping damage. BluePrint ships crate engines by LTL freight carrier, and its liftgate service is curbside, not to the front door.
- Parts. Check that every part you ordered arrived. BluePrint asks buyers to confirm the engine matches the configuration ordered: base, base dressed or fully dressed.
- Tags and paperwork. Read the warning and info tags on the engine. BluePrint says they list items such as fluid capacities and types. Keep the instructions and any registration card.
- Oil. Chevrolet says its LS3 long block may ship with or without oil, so verify the level before priming.
For our own delivery and return terms, see the shipping policy and the refund and return policy.
How do you break in a crate engine?
Follow the procedure from the engine's maker. They differ.
| Maker | Break-in steps |
|---|---|
| Chevrolet Performance (LS3 long block) | Use Mobil 1 dexos 0W-40. Drive at varying loads with no wide-open throttle for the first 30 miles or one hour, change oil and filter, drive 500 miles normally, then change oil and filter again. |
| BluePrint Engines | Flat-tappet cams need zinc oil and a 20-minute run at 2,000 to 2,400 rpm. Roller cams need no cam break-in. For the first 500 miles avoid sustained hard acceleration, then change oil and filter. No synthetic oil until after 9,000 miles. |
How do crate engine warranties work?
Coverage depends on the manufacturer and the exact part number. This is what each maker publishes.
| Maker | Published coverage | What to keep or do |
|---|---|---|
| Chevrolet Performance | Performance part engines 24 months or 50,000 miles. E-ROD systems 36 months or 50,000 miles. Short-block assemblies 24 months, unlimited miles. Racing engines excluded. | Keep the sales slip or repair order showing VIN, install date and mileage, plus maintenance receipts. For consumer-installed engines, coverage starts on the date of retail sale. |
| Ford Performance | Listed crate engines 24 months or 24,000 miles. Most Ford performance parts carry no warranty unless designated. Sealed racing engines and mechanical-lifter cam engines excluded. | Check the part number on Ford's warranty chart. Keep all maintenance receipts. |
| BluePrint Engines | Complete automobile engines 30 months or 50,000 miles, parts and labor. Short blocks 12 months, parts only. Race engines no warranty. | Register online to activate the warranty. Coverage applies to engines installed, registered and operated in the 48 contiguous states. |
All three exclude damage caused by improper installation, and Ford and BluePrint also exclude detonation damage, so the installation and break-in steps above are part of keeping coverage. Terms for engines bought here are on our warranty terms page. For prices, see the table above, and ask about a specific engine through contact.
Can I put a crate engine in a street car?
Check first. Chevrolet tags many crate engines with a Special Parts Notice for off-highway use only, and Ford Performance labels many of its engines for competition or off-highway use. EPA's engine switching policy and California's engine change rules apply to road vehicles. The LS swap guide covers the basics.
Common questions
What is the difference between a long block and a short block?
A short block is the block with the crankshaft, rods and pistons installed. A long block adds the cylinder heads, camshaft and valvetrain. Both still need an intake, fuel and ignition system, and accessories before the engine can run.
Is a turnkey crate engine ready to drop in and drive?
Not without setup. BluePrint Engines tells buyers not to assume fully dressed engines are turn key ready, and says timing and carburetor need to be checked after shipping. Chevrolet and BluePrint also require the engine to be primed with oil before first start.
Do I have to register a crate engine warranty?
BluePrint Engines says you activate its warranty by completing its online Engine Warranty Registration form. Chevrolet Performance's warranty relies on the original sales slip or repair order showing VIN, installation date and mileage, plus maintenance receipts. Ford asks owners to keep all maintenance receipts.
How long is the Chevrolet Performance crate engine warranty?
Chevrolet Performance lists 24 months or 50,000 miles for performance part engines and 36 months or 50,000 miles for E-ROD crate powertrain systems. Racing engines are excluded.
What should I check when my crate engine arrives?
Check the engine for shipping damage, confirm every part you ordered is there, and read the tags attached to the engine. Verify the oil level before priming, since some engines ship without oil.
How do I break in a new crate engine?
Use the engine maker's procedure. Chevrolet's LS3 long block break-in avoids wide-open throttle for the first 30 miles, then calls for an oil change and 500 miles of normal driving. BluePrint requires a 20-minute run at 2,000 to 2,400 rpm with zinc oil for flat-tappet cams.
Shop the listings
Freight, returns and the startup warranty are set out in our shipping policy, return policy and warranty terms.
Sources
The facts in this guide were checked against these pages. Makers revise specifications, so confirm critical figures with the manufacturer for your exact model.
- BluePrint Engines: blueprintengines.com/support/tech-support
- BluePrint Engines: blueprintengines.com/Files/Product%20assets/Service%20guides/BP_Standard_Installation_Guide_REV_7-15-22.pdf
- BluePrint Engines: blueprintengines.com/Files/Product%20assets/Service%20guides/SM115%20warranty%20document%20dated%2010-1-26.pdf
- California Bureau of Automotive Repair: bar.ca.gov/engine-changes
- Chevrolet Performance (General Motors): chevrolet.com/content/dam/chevrolet/na/us/english/index/performance/resources/installation-guides/crate-engines/03-pdf/LS3-LS376-480-LS376-525-Long-Block-Installation-Guide-19420381_Supplier.pdf
- Chevrolet Performance (General Motors): chevrolet.com/content/dam/chevrolet/na/us/english/index/performance/resources/installation-guides/crate-engines/02-pdf/ls-engine-controller-kits-all-naturally-aspirated-non-e-rod-except-lc9.pdf
- Chevrolet Performance (General Motors): chevrolet.com/performance-parts/owners-support
- Ford Performance (Ford Motor Company): performanceparts.ford.com/part/M-6007-X2302E
- Ford Performance (Ford Motor Company): performanceparts.ford.com/engines/
- Ford Performance (Ford Motor Company): performanceparts.ford.com/download/PDFS/fpp-engine-warranty.pdf
- Ford Performance (Ford Motor Company): performanceparts.ford.com/warranty/
- Ford Performance (Ford Motor Company): performanceparts.ford.com/part/M-6007-Z460FRT
- General Motors: chevrolet.com/content/dam/chevrolet/na/us/english/index/performance/resources/02-pdfs/PT-CR-0542-24_Powertrain_Warranty_Card.pdf
- GM Performance Parts 2011 catalog (General Motors): media.gm.com/dld/content/Pages/presskits/us/en/Chevrolet/presskits/10pri/_jcr_content/rightpar/sectioncontainer_1/par/download/file.res/GMPP_2011_Catalog.pdf
- U.S. Environmental Protection Agency: epa.gov/sites/default/files/documents/engswitch_0.pdf