In Stock
Sale
Old stock
Torqeedo Cruise 12 RL TorqLink Electric Outboard Motors
- Palletized and heavy shrink-wrapped for freight
- LTL carrier delivery with optional liftgate service
- Ships in 1–2 business days from Los Angeles, CA
- Transit typically 3–14 business days, continental US
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Stepping up to a 25 hp equivalent, the Cruise 12 RL swaps tiller control for remote steering, built on a 20-inch shaft with electric start, motor weight listed at 135 lbs, and a rating for boats up to 10 tons.
What TorqLink changes
This model ships with Torqeedo's TorqLink communication system, which moves data between the throttle, motor, and battery pack over a dedicated cable rather than relying only on the main power wiring, something Torqeedo says makes that data sharing faster and more accurate than its standard cable sets.
Remote-steer specifics
Being a remote-steer motor, it arrives without a throttle, batteries, or charger; all three are sold separately. The matched battery setup is two Power 48-5000 lithium packs, with a combined weight of 160 lbs, though lead-acid batteries can be substituted at the cost of the on-display capacity reading.
What ships standard
Included equipment covers the TorqLink data cable, the connection to remote steering with its own cable set, a main switch, a matched propeller, and a tilt switch. Confirm the 20-inch shaft fits your transom before ordering the rest of the control hardware, since a remote install also means sourcing a throttle to match.
Who this suits
Remote steering and the step up to a 25 hp equivalent put this motor a tier above Torqeedo's smaller tiller-controlled Cruise models, better suited to a helm station than a small open boat run by hand.
Water resistance and coverage? Sealed to IP67, with non-commercial coverage running 2 years.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns