In Stock & Ready to Freight Outboard Motors Old stock

Tohatsu 9.9HP | MFS9.9EEPL

Part no: #MFS9.9EEPL
Brand: Tohatsu
Condition: New
Regular price $3,509.94 Save $877.48
Sale price $2,632.46
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,632.46 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Tohatsu 9.9HP MFS9.9EEPL swaps tiller control for remote mechanical steering, meant for boats rigged with a console and steering wheel rather than a handle on the motor. It runs a 20-inch shaft, electric start backed by a manual method, and weighs about 104 lbs.

What remote steering changes

Remote mechanical steering connects to a steering cable and console rather than a tiller handle, so this motor is the right pick only if your boat is already set up, or will be set up, for that kind of hardware. Full throttle on this 333cc EFI twin tops out near 6100 rpm, with 5400 marking the bottom of that range.

What ships with this configuration

You get the propeller and a steering arm in place of a tiller handle, backed by the alternator-fed charging circuit, a tool kit, and a lanyard-style cutoff switch, plus an owner's manual. A fuel tank is not part of this particular build, so sort out your own tank and line before installing, and confirm your console cables suit remote mechanical steering. Warranty runs 5 years.

Is a tiller handle included? No, this version uses a steering arm for remote-console control instead.

What's the displacement? 333cc, the same EFI engine used throughout this 9.9 hp family.

Is power tilt part of this build? No, this particular configuration keeps trim and tilt manual.

Backup start method? Manual start is retained alongside electric.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns