In Stock
Sale
Old stock
Tohatsu 9.9HP | MFS9.9EEFUL
- Palletized and heavy shrink-wrapped for freight
- LTL carrier delivery with optional liftgate service
- Ships in 1–2 business days from Los Angeles, CA
- Transit typically 3–14 business days, continental US
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Tohatsu 9.9HP MFS9.9EEFUL keeps the 25-inch ultra-long shaft but skips power tilt, running manual trim and tilt with electric start, at about 110 lbs. It's lighter than its power-tilt sibling precisely because it leaves out that tilt hardware while keeping the same long reach.
Long shaft without power tilt
If your boat needs the extra shaft reach but you don't need push-button tilt, this trims weight and one more system to maintain compared with a power-tilt configuration. This is the 333cc EFI engine, running 5400 to 6100 rpm at full throttle, with electric start supported by a built-in charging system for basic electronics on board.
Equipment and fit
Measure your own transom before ordering, since this is the long-shaft end of this engine's range and isn't something you can trim down after the fact; too long and the propeller runs deep, too short and it cavitates near the surface. Factory-included parts: propeller, 3.1-gallon tank and fuel line, a tool kit and parts, an owner's manual, a lanyard-style kill switch, and the charging system that backs up electric start. Warranty coverage runs 5 years on this configuration, same term as the rest of the family regardless of shaft length or trim style.
Does this have power tilt? No, trim and tilt are manual on this version.
What starts it? Electric start.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns