In Stock & Ready to Freight Outboard Motors Old stock

Tohatsu 20HP MFS20EWEPTL Outboard Motor

Part no: MFS20EWEPTL
Brand: Tohatsu
Condition: New
Regular price $3,428.99 Save $857.25
Sale price $2,571.74
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,571.74 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Tohatsu MFS20EWEPTL combines console steering with a 20-inch shaft and an electric starter backed by a rope, weighing 116 lbs, one of the longer-shaft, console-controlled builds in the 20 hp range.

Choosing console over tiller

Console steering on this engine means cables run between the motor and a helm control head rather than a handle at the transom; confirm that rigging already exists on the boat, or budget to add it, before picking this over a tiller-steered version elsewhere in the lineup. The 20-inch shaft matches a standard transom height.

Starting and specs

Turning a key covers routine starts, with a pull cord ready if the battery runs low, so neither failure leaves the boat stranded out on the water. Displacement is 333cc from a two-cylinder EFI engine, with the throttle running up near 6,100 rpm at the top end, and Tohatsu's warranty on this unit runs 5 years.

Q: Can this be started with just the pull cord? Yes, that backup works whether or not the battery holds a charge.

Q: What shaft length does this version carry? Twenty inches, sized for a standard transom rather than a shorter or longer setup elsewhere.

Q: Does the weight include the power-tilt hardware? Yes, 116 lbs is the running weight with trim and tilt fitted.

Q: How many cylinders power this engine? Two, in the same 333cc EFI design used through the 20 hp range.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns