In Stock & Ready to Freight Outboard Motors Old stock

Tohatsu 20HP | MFS20EL

Part no: #MFS20EL
Brand: Tohatsu
Condition: New
Regular price $4,037.15 Save $1,009.29
Sale price $3,027.86
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$3,027.86 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Tiller steering and a pull-cord start define the Tohatsu MFS20EL, a 20 hp four-stroke carried on a 20-inch shaft and weighing 97 lbs, light enough for one person to lift on and off a small boat without help.

Matching shaft to transom

Before ordering, measure your transom height against this 20-inch shaft; get it wrong and the propeller runs either too shallow or too deep, which shows up as poor bite or excess spray once underway. Tiller control keeps the throttle, the shifter, and the steering all at the motor itself, so there's no console cable run to plan for when rigging a boat around it.

Ready to run once fueled

  • Propeller
  • External fuel tank, 3.1 gallons
  • Fuel line hose
  • Service tool kit and parts
  • Stop-switch lanyard
  • Owner's manual

Having the tank and hose already in the box means this one only needs fuel before it's ready to go, unlike the console-steered motors in the same 20 hp family that leave a tank as a separate purchase. Power comes from a two-cylinder, EFI block displacing 333cc, climbing as high as 6,100 rpm with the throttle wide open.

Q: Is there a key-start version of this configuration? Not this one; the MFS20EL is pull-cord start only, with no battery to keep charged.

Q: What does the Tohatsu coverage run? Five years on this engine.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns