In Stock & Ready to Freight Outboard Motors Old stock

Tohatsu 20HP MFS20EEPS Outboard Motor

Part no: MFS20EEPS
Brand: Tohatsu
Condition: New
Regular price $2,044.23 Save $511.06
Sale price $1,533.17
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$1,533.17 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Tohatsu MFS20EEPS puts console steering on the short-shaft side of the 20 hp line, with an electric starter and a rope as backup on a 15-inch shaft, weighing 102 lbs.

Console steering, short shaft

Because this one steers and shifts through a helm control head rather than a handle, check that your boat's console wiring and cable run suit that setup before ordering it over a tiller model elsewhere in the range. The 15-inch shaft places it with lower-transom boats among the console-steered options at 20 hp.

Starting and power

A key-turn starter handles routine starts, with a pull cord as backup if the battery runs down, so neither a dead cell nor a stuck starter leaves you stranded at the dock. The two-cylinder, 333cc EFI block runs with exceptional torque and low vibration, with the throttle band topping out near 6,100 rpm, and Tohatsu's coverage on it runs 5 years from purchase.

Q: Will this connect to a boat already wired for console controls? Yes, that's the setup this steering is built to plug into directly.

Q: Can it be started by hand if needed? Yes, the rope backup works regardless of the battery's charge.

Q: Does the shaft length affect how deep the prop sits? Yes, a 15-inch shaft is matched to a lower transom so the propeller runs at the right depth for that hull.

Q: What's the engine weight exactly? 102 lbs, as equipped with console steering and the dual starter setup.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns