In Stock & Ready to Freight Outboard Motors Old stock

Tohatsu 200HP | BFT200DLRA

Brand: Tohatsu
Condition: New
Regular price $23,913.12 Save $5,978.28
Sale price $17,934.84
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$17,934.84 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

At 200 horsepower, the Tohatsu BFT200DLRA is one of the biggest motors in this lineup, meant for a boat already rigged for a remote-steer helm rather than a tiller. Electric start, power trim and tilt, and a 20-inch shaft come standard, and the whole package weighs in at 584 lbs.

Remote steering on a big six-cylinder

A motor this size has to bolt into a boat with a helm control head and steering cables already in place; check that your existing rigging is sized for a six-cylinder outboard rather than something smaller before ordering. The 20-inch shaft still has to clear your transom correctly, the same rule that applies on much smaller motors.

Power and equipment

Six cylinders, 3471cc, electronic fuel injection, and a full-throttle ceiling of 6,000 rpm with 5,000 at the bottom of that band describe the heart of this engine. The crate also brings power trim and tilt, a fuel line hose, the charging system, a stop-switch lanyard, and the owner's manual, with electric start wired in from the factory.

Q: Is power trim and tilt included or optional? It's standard on the BFT200DLRA.

Tohatsu covers this motor with a 5-year warranty. At this horsepower, have the transom and mounting bolts inspected before install if the boat wasn't originally rigged for a motor this heavy; the stress on an undersized transom shows up quickly at full throttle.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns