In Stock & Ready to Freight Outboard Motors Old stock

Suzuki 225 HP DF225TX2

Brand: Suzuki
Condition: New
Regular price $17,137.99 Save $4,284.50
Sale price $12,853.49
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$12,853.49 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Suzuki's 225 HP DF225TX2 pairs a V6 four-stroke block of 220.5 cubic inches with remote controls, weighing 606 lb with a 25-inch shaft rather than a tiller-steered setup.

Who this motor suits

At this weight and shaft length, the motor is sized for boats with a deeper transom, such as larger center consoles or offshore-capable hulls, rather than small skiffs or jon boats. Remote controls mean the throttle and shift lever mount at the helm console rather than on the engine itself, so confirm your rigging is already set up for remote steering before ordering.

Power and electrical load

The V6 layout produces 225 HP and charges the boat's batteries through a 54 amp alternator, which is enough headroom to run livewells, electronics and trim systems at the same time without dimming lights or dropping voltage. Electronic fuel injection feeds all six cylinders, and electric start is standard. A fresh water flushing port makes rinsing the cooling system straightforward after time in salt water.

Trim, shift and finish

Power trim and tilt lift and lower the motor from a switch, and the gear lever shifts forward, neutral and reverse through a standard rotation propeller on this listing. The finish is Nebular Black.

Is this a standard-rotation or counter-rotation motor? Standard rotation. What shaft length does it use? 25 inches, suited to a deeper transom than a short-shaft motor.

Specifications

Specification Attributes
HP 225 HP
Cylinders V6
Displacement 220.5 CI
Starting Electric
Controls Remote
Power Trim & Tilt Power Trim & Tilt
Gear Shift Forward, Neutral, Reverse
Propulsion Standard Rotation
Weight 606
Alternator Output 54 Amp
Color Nebular Black
Shaft Length 25”
Family Type 4-Stroke
Fuel Induction EFI

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns