Inspected & Condition Reported Nationwide Insured LTL Freight
(209) 264-2179 [email protected]
0
Miller Syncrowave 300 Ac/Dc TIG and Stick Welder Complete Pkg W/Wireless Foot Control (951872)
Inspected & Documented Condition notes recorded before palletizing.
30-Day Startup Warranty Covers block, heads and internal moving components.
In Stock & Ready to Freight Welding Equipment Old stock

Miller Syncrowave 300 Ac/Dc TIG and Stick Welder Complete Pkg W/Wireless Foot Control (951872)

Brand: Miller
Condition: New
Regular price $5,783.91 Save $1,735.17
Sale price $4,048.74
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $295.00, insured LTL, priced by delivery zone (rates)
From $4,343.74 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Shop layouts that have the operator circling a part rather than standing at a fixed bench are the reason this package swaps a wireless pedal in for the standard wired one, on the same 300-amp Syncrowave cart-and-cooler setup.

Everything else stays the same

Auto-Link still senses the primary voltage on its own among the 208/240/480V options, squarewave AC with adjustable balance still handles aluminum oxide cleaning, and Pulsed TIG paired with DIG control covers the same spread of electrodes and base metals. None of that changes just because the pedal lost its cord.

Size and power needs

Combined with its Coolmate 3 cooler and cart, this package comes in at 176 pounds, up from 101 for the power source on its own. An 8-foot cord with no plug attached is how it reaches your panel, wired for single- or three-phase service.

What is in the package

A water cooler and running gear sized to carry both pieces come filled with four gallons of coolant ready to go, and the carton also holds a TIG torch kit on a 25-foot lead, a pair of Dinse connectors, an owner's manual, and the wireless pedal itself.

Can the pedal be swapped for a wired one later? That would need to be sourced separately; this package is built around the wireless unit.

Backed by a 3-year Miller warranty.

Specifications

Brand Miller
SKU IMIL20200003
MPN MIL951872
Mfgs MPN 951872
UPC 715959678001
Prop65 Yes
Process Stick, TIG
Max Amperage Output 300 Amps
Phase Both
Manufacturer’s Warranty 3 Years
Polarity AC/DC
Duty Cycle 60%
Duty Cycle 60% @ 210A
Portability 101 lbs
Skill Level Weekend Warrior, Career Welder
Discontinued Product No

Welding Equipment Setup & Pre-Operation Checklist

  • Verify workshop mains voltage, circuit breaker rating, and phase match the welding machine specifications.
  • Inspect ground clamp cable, torch lead, and work cables for tight, clean, low-resistance connections.
  • Secure shielding gas cylinders upright with safety chains; inspect regulator and hose connections for gas leaks.
  • Confirm correct wire diameter, drive roll groove profile, and contact tip size match the spool installed.

Full terms: 30-day warranty · returns

More Welding Equipment

View all welding equipment