Inspected & Condition Reported Nationwide Insured LTL Freight
(209) 264-2179 [email protected]
0
Miller Dynasty 800 TIG Welder and Water-Cooled Package with Foot Control (951696)
Inspected & Documented Condition notes recorded before palletizing.
30-Day Startup Warranty Covers block, heads and internal moving components.
In Stock & Ready to Freight Welding Equipment Old stock

Miller Dynasty 800 TIG Welder and Water-Cooled Package with Foot Control (951696)

Brand: Miller
Condition: New
Regular price $14,062.26 Save $4,218.68
Sale price $9,843.58
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $295.00, insured LTL, priced by delivery zone (rates)
From $10,138.58 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This Dynasty 800 package adds a water-cooled torch, a foot control, and a full accessory cart to the same 800A AC/DC power source, built around the same 1-inch aluminum welding capacity. Duty cycle is rated 60% at 450A and 60% at 600A.

What rides on the cart

The cart carries a single cylinder rack, a foot pedal holder, cable and torch holders, and TIG electrode filler holders. Along with the power source, the package includes a Coolmate 3.5 cooling system, an RFCS-14 foot control, a 25 ft water-cooled torch, a torch cable cover, an accessory kit sized for that torch, a regulator and flow gauge, a gas hose, a weld lead with clamp, and coolant.

Controls on the machine

Nine program memories store settings, independent EP/EN amplitude control manages heat input separately from electrode heat, and extended AC balance with adjustable frequency fine-tunes the arc on aluminum. On the stick side, arc characteristics adjust through DIG control, and an adaptive hot start covers a range of electrodes without extra setup. The power source takes anywhere from 208 to 575 volts without manual relinking, and the primary cord is ordered separately.

Is the foot control wired? Yes, this package uses the RFCS-14 foot control rather than a wireless remote.

Does it include the torch? Yes, a 25 ft water-cooled torch ships as part of this package, unlike the bare power source.

Specifications

Brand Miller
SKU IMIL20130133
MPN MIL951696
Mfgs MPN 951696
UPC 715959654210
Prop65 Yes
Material Aluminum, Mild Steel, Stainless Steel, Titanium
Process Stick, TIG
Max Amperage Output 800
Usage Heavy Industrial
Phase Both
Manufacturer’s Warranty 3 Years
Polarity AC/DC
Duty Cycle 60%
Duty Cycle 60% at 450A, 60% at 600A
Portability 198 lbs
Skill Level Career Welder
Input Voltage 208, 230, 400, 460, 575
Discontinued Product No

Welding Equipment Setup & Pre-Operation Checklist

  • Verify workshop mains voltage, circuit breaker rating, and phase match the welding machine specifications.
  • Inspect ground clamp cable, torch lead, and work cables for tight, clean, low-resistance connections.
  • Secure shielding gas cylinders upright with safety chains; inspect regulator and hose connections for gas leaks.
  • Confirm correct wire diameter, drive roll groove profile, and contact tip size match the spool installed.

Full terms: 30-day warranty · returns

More Welding Equipment

View all welding equipment