In Stock & Ready to Freight Outboard Motors Old stock

Mercury 9.9ELH Command Thrust FourStroke

Part no: 9.9ELH-Command-Thrust
Brand: Mercury
Condition: Used
Regular price $2,683.26 Save $670.81
Sale price $2,012.45
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,012.45 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used 9.9ELH Command Thrust swaps the remote-steer setup of the EL version for a tiller handle, keeping the same 20-inch shaft and electric start, with Mercury's 2.08:1 gearcase doing the work here rather than a taller high-thrust unit despite the Command Thrust name on the cowling.

Tiller steering, in one hand

With tiller control, one hand manages steering, throttle, and gear shifting together, which suits boats run without a separate console, unlike the remote-steer EL variants sold in this same engine family of motors. That makes it a natural fit for a small aluminum skiff or a sailboat's rail-mounted bracket.

What's under the hood

Dry weight comes in at 84 lb, with trim handled by a manual, ratcheting lever rather than power tilt, and ignition handled by CDI with electronic spark advance built in.

Buying this as a used motor

Since a used listing typically comes with no formal record of hours or service, ask the seller directly before committing to a price. Once it's in your boat, fuel it with 87 octane gasoline, ethanol up to 10 percent is fine, and service it with Mercury FourStroke 10W-30 oil.

Common questions

Is steering tiller or remote? Tiller, controlled from the handle.

What's the shaft length? 20 inches.

Does it have power tilt? No, trim and tilt are both manual here.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns