In Stock & Ready to Freight Outboard Motors Old stock

Mercury 60EXLPT Command Thrust FourStroke

Part no: 60EXLPT
Brand: Mercury
Condition: Used
Regular price $7,018.70 Save $1,754.67
Sale price $5,264.03
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$5,264.03 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used Mercury 60EXLPT outboard carries the 25-inch x-long shaft and remote steering, with electric start. This unit's paperwork from Mercury gives the gearcase as standard rather than Command Thrust, despite the Command Thrust reference in the model name; confirm that detail with us before ordering if it matters for your propeller.

What's under the hood

Power comes from an inline-4, single-overhead-cam design. The CID/CC figure Mercury gives is 60.8/995. Full throttle runs 5500 to 6000 rpm, dry weight is 247 lbs, and alternator output is 18 amps, 226 watts. Shallow water trim range is 20 degrees, with an optional remote fuel tank connection.

Fit and coverage

A 25-inch shaft calls for a taller transom than the standard-length version of this motor uses; measure before ordering. This engine wants 87-octane fuel at minimum, up to 10 percent ethanol, running on Mercury's FourStroke 25W-40 oil, and it carries a 3-year warranty. A used motor's hours are unit-specific; reach out before ordering if that detail matters to you.

Does the longer shaft affect the gearcase question above? No, shaft length and gearcase type are separate specifications; this unit's gearcase is standard regardless of shaft length.

Is a remote fuel tank connection available on this engine? Yes, Mercury lists that as an optional hookup for this model. Mercury outboards

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns