In Stock & Ready to Freight Outboard Motors Old stock

Mercury 60ELHPT Command Thrust FourStroke

Part no: 60ELHPT
Brand: Mercury
Condition: Used
Regular price $6,956.59 Save $1,739.15
Sale price $5,217.44
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$5,217.44 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used Mercury 60ELHPT outboard pairs tiller steering with the Command Thrust gearcase, built around a larger propeller for pushing heavier loads at low speed rather than chasing top-end speed. Electric start and a 20-inch shaft round out this rigging.

Engine specs

This inline-4, single-overhead-cam engine carries a CID/CC displacement of 60.8/995. Mercury rates full throttle between 5500 and 6000 rpm, dry weight at 247 lbs, and the gearcase ratio at 2.33:1. An 18-amp, 226-watt alternator and a 20-degree shallow water trim range round out the package, along with an optional remote fuel tank connection.

Controls and running it

Starting is electric turn-key, throttle and shift controls are mechanical and sold separately, and electronic fuel injection handles fuel delivery. Mercury recommends 87-octane fuel with up to 10 percent ethanol and its own FourStroke 25W-40 oil. This is a pre-owned engine, so running hours differ unit to unit; let us know if you need that information before ordering. Mercury backs this family of engines with its standard 3-year warranty.

Does this come with a propeller? Confirm propeller inclusion with us before ordering, since sizing depends on your hull and load with the Command Thrust gearcase.

Can this run off a remote fuel tank instead of carrying its own? Yes, Mercury lists an optional remote fuel tank connection for this engine. Mercury outboards

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns