In Stock
Sale
Old stock
Mercury 25HP EH FourStroke Outboard
- Palletized and heavy shrink-wrapped for freight
- LTL carrier delivery with optional liftgate service
- Ships in 1–2 business days from Los Angeles, CA
- Transit typically 3–14 business days, continental US
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
The Mercury 25HP EH FourStroke is a new outboard on a 15 inch short shaft, tiller steered, with electric start, aimed at boats with a lower transom than the long-shaft versions in Mercury's 25 horsepower range.
Who it suits
Short-shaft, tiller-steered 25s like this one commonly go on aluminum fishing boats, jon boats, and small utility hulls where the operator sits close to the motor. Electric start removes the pull cord from the routine, and since power trim is not listed on this spec sheet, plan on adjusting running angle by hand.
Mounting and fuel
Measure straight down from the top of your transom to the keel before ordering; a 15 inch shaft suits a lower transom, and getting the length wrong lets the anti-cavitation plate sit too high or too low, costing both speed and cooling flow. Keep the included quick-connect line and 6.6 gallon tank filled with fresh fuel, since four-stroke outboards are more sensitive to stale gasoline than older two-strokes were. A tiller handle keeps throttle, shift, and steering within reach of one hand, which many owners of small aluminum boats prefer to running cables out to a console.
Specifications
The three-cylinder four-stroke displaces 32.1 cubic inches and peaks at 5000-6000 rpm through electronic fuel injection, weighing 157 lbs dry. Mercury backs the EH with its standard 3-year warranty. In the box: an owner's manual, a tool kit, mounting hardware, the 6.6 gallon tank, and its quick-connect fuel line; the propeller is sold separately.
Does the EH have power trim? No, plan on manual adjustment. What shaft length is this? 15 inches, the short-shaft option here.
Startup & Installation Checklist
- Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
- Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
- Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
- Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.
Full terms: 30-day startup warranty · returns