In Stock & Ready to Freight Outboard Motors Old stock

Mercury 115 EXLPT Command Thrust FourStroke

Brand: Mercury
Condition: Used
Regular price $9,689.55 Save $2,422.39
Sale price $7,267.16
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$7,267.16 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used Mercury 115 EXLPT Command Thrust FourStroke is an inline four-cylinder, 2.1-liter EFI outboard on a 25-inch shaft with a Command Thrust gearcase, built for pushing a heavier boat or a loaded bass or pontoon rig rather than chasing top speed.

What Command Thrust changes

The Command Thrust gearcase pairs a larger housing with a bigger-diameter, higher-pitch-range propeller than a standard gearcase, giving better bite in reverse and under load at some cost to peak rpm; full throttle on this engine runs 5000-5800 rpm. The gearcase ratio here is 2.07:1, and the CARB star rating is 3.

Specifications to check before buying

Steering is remote with dual-cable mechanical control, backed by hydraulic power steering, with an electro-hydraulic upgrade available on duals or with an advanced tiller fitted separately. It runs a single overhead cam, 8-valve inline four, fed by multi-port electronic fuel injection, with Smart Start electric starting and SmartCraft Engine Guardian monitoring, and comes in at 363 pounds dry. A propeller is not included; the finish is Phantom Black.

Does a propeller come with this engine? No, propellers are sold separately. What is the shaft length? 25 inches, meant for a standard-to-tall transom common on boats this size.

Since this is a used outboard, confirm logged hours and any service history with us directly, and ask about a water test before committing to the purchase.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns