Inspected & Condition Reported Nationwide Insured LTL Freight
(209) 264-2179 [email protected]
0
Lincoln Aspect 230 Ac/Dc TIG Welder Air Cooled One-Pak (K4341-1)
Inspected & Documented Condition notes recorded before palletizing.
30-Day Startup Warranty Covers block, heads and internal moving components.
In Stock & Ready to Freight Welding Equipment Old stock

Lincoln Aspect 230 Ac/Dc TIG Welder Air Cooled One-Pak (K4341-1)

Brand: Lincoln Electric
Condition: New
Regular price $2,842.26 Save $852.68
Sale price $1,989.58
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $185.00, insured LTL, priced by delivery zone (rates)
From $2,174.58 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Rather than sell the bare power source, this Aspect 230 Air-Cooled One-Pak (K4341-1) bundles Lincoln's 230A AC/DC TIG machine with everything needed to start welding, torch included, so there's nothing extra to track down before striking an arc.

What's in the pak

Beyond the power source, the box holds a foot pedal (K870) and an air-cooled torch from the 26 Series, 25 feet long with its consumables attached. A gas regulator paired with a flow gauge rounds out the shielding-gas side, a ground clamp on a 15-foot lead handles the work connection, and the torch itself locks onto its cable through a twist-mate fitting that needs no tools.

What the welder does

Peak output is 230A, with a 35% duty cycle rating up there, and the machine handles stock up to 1/4 inch thick. Aluminum work gets four selectable AC wave shapes: Soft Square, Sine, Square, and Triangular, each trading off puddle control, arc sound, travel speed, and heat input differently. The power supply self-adjusts across a 120-460 volt range at 50 or 60 Hz, whether the shop runs single- or three-phase service, and AC Auto Balance sets the cleaning-to-penetration ratio automatically. Nine welding procedures can sit in saved memory at once.

Common questions

Is this ready to weld right out of the box? Yes, the torch, pedal, regulator, and ground lead all ship with the power source. Does it handle aluminum? Yes, through its AC wave shapes and auto balance circuit. This package is labeled under California's Proposition 65 rule, as welding gear commonly is.

Specifications

Brand Lincoln
SKU ILIN20200003
MPN LINK4341-1
Mfgs MPN K4341-1
Prop65 Yes
Process Stick, TIG
Max Amperage Output 230 Amps
Phase Single Phase
Manufacturer’s Warranty 3 Years
Polarity AC/DC
Duty Cycle 60%
Duty Cycle 60% @ 190A | 35% @ 230A
Portability 50 lbs
Skill Level Weekend Warrior, Career Welder
Discontinued Product No

Welding Equipment Setup & Pre-Operation Checklist

  • Verify workshop mains voltage, circuit breaker rating, and phase match the welding machine specifications.
  • Inspect ground clamp cable, torch lead, and work cables for tight, clean, low-resistance connections.
  • Secure shielding gas cylinders upright with safety chains; inspect regulator and hose connections for gas leaks.
  • Confirm correct wire diameter, drive roll groove profile, and contact tip size match the spool installed.

Full terms: 30-day warranty · returns

More Welding Equipment

View all welding equipment