In Stock & Ready to Freight Outboard Motors Old stock

Honda 9.9HP Portable Outboard | BF10DK3SHS

Brand: Honda
Condition: New
Regular price $2,694.99 Save $673.75
Sale price $2,021.24
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,021.24 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Honda BF10DK3SHS is a 9.9 hp portable four-stroke built on a short 15-inch shaft with tiller steering and combined electric-and-manual starting, weighing 102 pounds, aimed at a low-transom boat where the owner still wants push-button convenience.

Short shaft with electric start

This pairs the shortest shaft offered in the 9.9 hp lineup with electric starting, a less common combination than the longer-leg electric-start versions in the same series; it suits a low-transom jon boat, dinghy, or small runabout where the owner does not want to pull-start every time. A short shaft that is too long for your transom raises cavitation risk, so measure carefully before ordering, ideally against the boat itself rather than a similar-looking model.

Specifications and what is included

The 222cc, carbureted, four-stroke twin here reaches a 5000-6000 rpm range at full throttle and weighs 102 pounds. The manual pull-cord remains as backup starting if the battery is low or disconnected. In the box: a stop-switch lanyard, an external 3-gallon fuel tank and its fuel line, the standard propeller, a charging system, and the owner's manual, all covered by Honda's 5-year powerhead warranty.

Will a 15-inch shaft work on a pontoon? Only if your transom height matches; many pontoons need a longer leg from elsewhere in this series. Is a battery included? No, you supply your own starting battery.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns