In Stock & Ready to Freight Outboard Motors Old stock

Honda 25HP Outboard | BF25D3SHG

Brand: Honda
Condition: New
Regular price $4,279.99 Save $1,070.00
Sale price $3,209.99
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$3,209.99 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Tiller-steered and built on a 15-inch shaft, the BF25D3SHG is Honda's lightest 25 HP four-stroke in this range at 155 pounds, with a gas-assisted tilt strut rather than remote or powered controls. New.

Who a short-shaft tiller rig like this fits

Putting throttle and steering together at the transom suits a smaller hull where the operator sits near the stern, and the 15-inch shaft is sized for a lower-transom boat rather than a taller one. A gas-assisted strut lifts and lowers the engine by hand, trimming installed weight compared with an electric trim system. The three-cylinder, 552cc block draws through triple carburetors and reaches full throttle somewhere between 5000 and 6000 rpm.

Before you buy

Check the transom height against the 15-inch figure; a shaft this short doesn't suit a high-transom hull, and Honda builds longer-shaft versions of this same 25 HP block for that case. Starting is electric here, so there's no pull cord to fight with on a cold morning, and the lower unit still needs a propeller sized correctly to the boat it pushes.

What ships with it

Expect the propeller, an onboard charging system, the gas-assisted tilt strut, a stop switch lanyard, and the printed owner's manual, under a five-year factory warranty.

Q: Does this version use power trim? No, tilt is gas-assisted and set by hand at the transom.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns