In Stock & Ready to Freight Outboard Motors Old stock

Honda 250HP | BF250DXRA WT

Brand: Honda
Condition: New
Regular price $23,058.99 Save $5,764.75
Sale price $17,294.24
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$17,294.24 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The BF250DXRA WT combines a 25-inch shaft with 250 horsepower of four-stroke V6 output. Honda's scale puts this unit at 617 lbs. A steering cable connects this unit to the console, with no tiller handle fitted. This unit carries a white cowling, which comes down to preference rather than performance. Gearing here turns the usual direction rather than counter-rotating, which matters only if you're planning a twin-engine install down the line. 3583cc across six cylinders, with EFI fuel injection, sums up this powerhead.

Check before ordering

Take a transom measurement before you order, and compare it against this 25-inch shaft rather than assuming by horsepower class alone. Honda's spec puts full throttle at 5300-6300 rpm here. Repowering is the typical reason buyers land on this horsepower, matching what the hull is already rated for.

Package contents

Beyond the Grand Prix White cowling, standard equipment covers charging for the battery bank and a cooling-flush point, with trim and tilt; closing with the manual and Honda's 5-year warranty promise. This engine excludes a propeller; add that separately.

Should I worry about rotation on a single engine? No, rotation direction only becomes a consideration once a second engine joins the installation.

Is the propeller included with this motor? No, purchase one separately.

Does this engine use fuel injection? Yes, EFI electronic fuel injection rather than a carburetor.

Is starting electric only? Yes, there's no manual pull-start backup at this horsepower.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns