Honda 150HP | BF150DXRA WT

The BF150DXRA WT is the white-cowling finish of Honda's standard-rotation 150 hp outboard, built on a 25-inch shaft and steered by remote mechanical cable.

White cowling notes

Only the cowling finish changes to white on this version; shaft length stays at 25 inches, and the four-cylinder, 2354cc engine underneath is the same EFI-fed, electric-start design as the standard-color model in this range. Steering stays remote mechanical, worked through a cable to a wheel at the console rather than a handle. Buyers choosing between the two finishes are choosing on looks alone, not performance, since the powerhead, gearcase, and controls underneath are identical parts, down to the shaft length and the steering hardware.

Running range and weight

This motor weighs 478 lbs, the same as the standard-color BF150DXRA, with a full-throttle spec from Honda that runs from 5000 up to 6000 rpm. Neither figure changes with the cowling finish, since the two versions share the same powerhead, gearcase, and lower unit down to the last bolt.

Common questions

Does it come with a propeller? No, order one separately to match your boat.

What's standard? Besides the white cowlings, this motor carries the same gear as the standard-color DXRA: a charging system, a fresh-water flush port, trim and tilt worked by a switch, and an owner's manual, with Honda's 5-year warranty.