In Stock & Ready to Freight Outboard Motors Old stock

Honda 150HP | BF150DLRA

Brand: Honda
Condition: New
Regular price $11,695.99 Save $2,924.00
Sale price $8,771.99
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$8,771.99 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The Honda BF150DLRA is a new 150 hp four-stroke outboard on a 20-inch shaft with remote mechanical steering, the standard-finish option at this horsepower built for a shorter transom.

Shaft and steering

Check your transom for a 20-inch shaft fit before ordering this motor rather than estimating from the boat's length alone. Remote mechanical steering runs off a cable and wheel, so this suits a console-steered boat rather than a tiller-handled one at the stern. Four cylinders give 2354cc of displacement, EFI supplies the fuel, and the starter is electric rather than a pull cord. Shaft length is fixed at the factory on this model, so it is not something you can adjust later.

Running range and weight

Honda's rating for full-throttle operation on this motor sits between 5000 and 6000 rpm, with a listed weight of 472 lbs, among the lighter options in Honda's 150 hp lineup thanks to the shorter shaft. That makes it a reasonable pick when transom height, not raw output, is the limiting factor on your boat.

Common questions

Does a propeller come with it? No, order one separately for your boat and typical load.

What's standard equipment? This motor rounds out its equipment with a charging system, powered trim and tilt, a port that flushes the block with fresh water, an owner's manual, and Honda's 5-year warranty.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns