In Stock & Ready to Freight Outboard Motors Old stock

Evinrude E40DRGL E-TEC Outboard Motor

Part no: E40DRGL
Brand: Evinrude
Condition: Used
Regular price $3,906.87 Save $976.72
Sale price $2,930.15
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,930.15 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

This used Evinrude E40DRGL combines remote steering, dual rope-and-electric starting, and power trim and tilt on a two-cylinder E-TEC.

What is confirmed for this unit

It is rigged on a 20 in shaft and weighs 181 lbs (82 kg); ask us to confirm the exact horsepower rating before ordering, since that figure is not stated plainly for this particular unit.

Starting and trim

Both rope and electric starting are built in, so a flat battery is not your only option, and power trim and tilt adjust running angle from a switch rather than by hand. Controls are mechanical throughout, which keeps the rigging straightforward to maintain over time.

A light coat of fresh grease on the swivel bracket and tilt tube is an easy thing to check for on a used motor before buying.

If this motor will see occasional saltwater use, plan on flushing it with fresh water after every outing regardless of what the prior owner did.

Ask us to confirm the exact rigging details for this particular unit before ordering, since configurations can vary within the same outboard family from one individual example to the next, more than buyers often expect.

Is the horsepower rating confirmed? Ask us before ordering; the rigging and weight described above are firm facts about this unit.

Is it new? No, this E40DRGL has been used, so check its hours with us beforehand.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns