In Stock & Ready to Freight Crate Engines Old stock

BluePrint PS4272CTC1 SBC 427 Pro Carb Base Dressed Engine 540HP

Brand: BluePrint Engines
Condition: New
Regular price $9,178.99 Save $2,294.75
Sale price $6,884.24
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $295.00, insured LTL, priced by delivery zone (rates)
From $7,179.24 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

BluePrint's PS4272CTC1 is a new 427 cubic inch small-block Chevy built for serious street and strip use, producing 540 horsepower and 535 ft-lbs of torque with aluminum cylinder heads and a hydraulic roller camshaft. It arrives base dressed and carbureted rather than as a bare long block.

Bottom end and heads

Inside is a forged crankshaft and forged 6.000-inch connecting rods swinging forged pistons, balanced both internally and externally, in a high-strength cast iron block with a 4-bolt main and a 1-piece rear main seal. The BluePrint HP8103 aluminum heads use 64cc chambers with 2.08-inch intake and 1.60-inch exhaust valves feeding 220cc intake and 67cc exhaust runners. Intake duration runs 240 degrees and exhaust duration 248 degrees on a 112-degree lobe separation.

What ships on the engine

A Holley 850 cfm double-pumper carburetor with manual choke, a Pro Series ready-run distributor, an intake manifold, valve covers, spark plugs and wires, a harmonic balancer, a timing cover, and an oil pan are all installed before it leaves the shop, giving you a GM small-block-compatible 427 that is ready to drop in and fire.

Emissions and coverage

Treat this as an engine-swap part rather than a factory replacement if your vehicle is titled in California, since it falls under that state's rules for engine changes rather than OEM substitutions. Warranty is 41 months or 50,000 miles. Part number PS4272CTC1.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns