In Stock & Ready to Freight Crate Engines Old stock

BluePrint Builder Series 632/815HP Blackout Reaper EFI Crate Engine and 4L80E Transmission Combos B632FKB4L8X

Brand: BluePrint Engines
Condition: New
Regular price $24,299.00 Save $6,074.75
Sale price $18,224.25
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $295.00, insured LTL, priced by delivery zone (rates)
From $18,519.25 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

BluePrint's Blackout Reaper is the biggest engine in this lineup, a 632-cubic-inch Chevy big-block making 815 horsepower and 775 pound-feet on 11.0:1 compression, paired with a 4L80E automatic transmission built with lockup capability.

Big-block architecture

A tall-deck block, roughly 0.400 inch taller and wider than a stock big-block casting, carries a forged crankshaft with a 4.750-inch stroke and forged H-beam 6.635-inch connecting rods under forged pistons, balanced internally. The PS8012 aluminum heads use a 0.300-inch raised exhaust port over the factory design, with 2.300-inch intake and 1.880-inch exhaust valves, over a hydraulic roller camshaft. BluePrint says builders need to check clearance for the exhaust, the shift linkage, and the steering components before ordering one of these for a specific chassis.

Fuel system and transmission

A complete EFI system rated at 1,250 cfm runs through an Aeromotive A1000 fuel pump and a single-plane aluminum intake. The 4L80E transmission comes with its own electronic controller, a torque converter stalling between 3,800 and 4,200 rpm, a non-weighted flexplate, and a starter, with gear ratios running from 2.482:1 in first down to a 0.750:1 overdrive. A black-finish front accessory drive carries the alternator, the compressor, the power-steering pump, and the water pump together. This combo fits Chevrolet big-block applications from 1991 through 2000; not designed for EGR compatibility.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns