In Stock
Inspected & Documented
Condition notes recorded before palletizing.
30-Day Startup Warranty
Covers block, heads and internal moving components.
In Stock & Ready to Freight
Crate Engines
350 Deluxe Dressed Carbureted Crate Engine
$5,008.31
+ $295.00 flat-rate insured LTL freight
(details)
$5,303.31 delivered to the continental US
- Palletized and heavy shrink-wrapped for freight
- LTL carrier delivery with optional liftgate service
- Ships in 1–2 business days from Los Angeles, CA
- Transit typically 3–7 business days, continental US
Secure checkout by Stripe
Need a matched transmission, controls or wiring package? Speak with a parts specialist.
Details & Inspection Notes
Engines 350CI Crate Engine, Base Dressed Longblock, Carbureted
HP And Torque: 390 HP / 410 FT LBS. Compression ratio: 9.2:1. Aluminum heads. Hydraulic roller cam. Cast iron crank. Hypereutectic pistons.
BLOCK:
NEW BluePrint cast iron block. Manufactured and Machined in the USA! 4-bolt main. 4.000″ bore. 1-Piece rear main seal. Mechanical fuel pump provision. Passenger Side Dipstick. Drilled and tapped for clutch linkage.
ROTATING ASSEMBLY:
Cast Iron Crankshaft. 3.480″ Stroke. Forged 5.700″ connecting rods. Hypereutectic pistons. Internal Front/ External Rear engine balance.
CYLINDER HEADS:
Aluminum Cylinder Heads, H8002K. 64cc chamber. 2.02″ intake/1.60″ exhaust valves. 195cc intake/75cc exhaust runners.
CAM SPECS:
Roller cam..495 Intake.502 Exhaust
BP3505CTCD 350 Deluxe Dressed Carbureted Crate Engine
Sku # 227BP3505CTCD
Mfr. Part # BP3505CTCD
Condition
New
Details
Info
350CI Crate Engine, Base Dressed Longblock, Carbureted
- HP And Torque: 390 HP / 410 FT LBS
- Compression ratio: 9.2:1
- Aluminum heads
- Hydraulic roller cam
- Cast iron crank
- Hypereutectic pistons
BLOCK:
- NEW BluePrint cast iron block
- Manufactured and Machined in the USA!
- 4-bolt main
- 4.000″ bore
- 1-Piece rear main seal
- Mechanical fuel pump provision
- Passenger Side Dipstick
- Drilled and tapped for clutch linkage
ROTATING ASSEMBLY:
- Cast Iron Crankshaft
- 3.480″ Stroke
- Forged 5.700″ connecting rods
- Hypereutectic pistons
- Internal Front/ External Rear engine balance
CYLINDER HEADS:
- BluePrint Aluminum Cylinder Heads, H8002K
- 64cc chamber
- 2.02″ intake/1.60″ exhaust valves
- 195cc intake/75cc exhaust runners
CAM SPECS:
- Roller cam
- .495 Intake.502 Exhaust
- 220 Intake / 224 Exhaust duration
- @.050-114 degree lobe separation
IGNITION TIMING:
- 32 Degrees Total at 3500 RPM
ALSO INCLUDES:
- Valve covers
- Harmonic balancer
- Spark plugs
- Spark plug wires
- Standard Rotation Long Style Water Pump
- Waterneck and Thermostat
- Fuel Pump
- Oil pan
- Timing cover
- Aluminum intake
- HEI distributor
- 600 cfm carburetor
- Dyno test results shipped with engine
WARRANTY:
30 month / 50,000 mile
Startup & Installation Checklist
- Replace timing components, water pump and plugs before initial startup where applicable.
- Refill all fluids with manufacturer-specified oil and coolant.
- Verify sensors, ECU pinouts and grounds against your chassis or hull wiring.
- Startup warranty covers heads, block and internal lubricated components for 30 days from delivery.
Full terms: 30-day startup warranty · returns
