In Stock & Ready to Freight Outboard Motors Old stock

2018 Yamaha F40 Midrange Mechanical 20 Ff40LA Outboard Motor

Brand: Yamaha
Condition: New
Regular price $7,388.99 Save $1,847.25
Sale price $5,541.74
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$5,541.74 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Yamaha's 2018 F40 Midrange Mechanical, model code Ff40LA, runs a 747 cc, three-cylinder four-stroke on a 20-inch shaft, rigged for remote mechanical steering rather than a tiller. At 214 lbs dry with electric start, it sits between portable and full midrange outboards in Yamaha's lineup.

Rigging checks

Because this is the remote mechanical version, make sure the boat already has, or can take, a mechanical steering cable and control box; the tiller version of this same F40 weighs more and mounts differently. The 17-amp alternator is worth checking against whatever gauges or electronics are planned for the boat.

Power delivery

A single throttle valve feeds a long-track intake manifold, with electronic fuel injection tuned through a control module for consistent starts in hot or cold weather. Trim moves from -3 to +20 degrees and tilt reaches 20 degrees, the gearcase runs a 2.00:1 ratio, and this one is built to handle either fresh water or salt. Oil capacity is 1.7 liters with a filter, dropping to 1.5 liters without one, and full throttle tops out in the 5000-to-6000-rpm band.

Is there a way to flush it without running it? Yes, a freshwater flush device is built in. What guards against corrosion? A five-layer anti-corrosive paint system over a proprietary alloy protects the block. Is it electric start? Yes, electric start is standard on this remote-control rigging.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns