In Stock & Ready to Freight Outboard Motors Old stock

2018 Yamaha F20 Portable Tiller ES F20SEHA Ouboard Motor

Brand: Yamaha
Condition: New
Regular price $2,713.09 Save $678.27
Sale price $2,034.82
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$2,034.82 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Rather than a console, this F20SEHA is worked by hand through a tiller handle right at the stern; it runs on a 15-inch shaft, starts electrically, and this listing gives it a dry weight of 117 lbs.

Tiller handling on a short shaft

A 15-inch shaft keeps the motor sized for smaller, lighter hulls, which is a different fit than the 20-inch tiller trims Yamaha builds on this same engine, so confirm your transom before assuming either will interchange. Trim adjusts between -4 and +16 degrees and tilt tops out at 67 degrees, both adjusted manually right where the tiller handle sits rather than through any remote control.

A pressurized wet-sump oil pump, CDI microcomputer ignition and an automatic system that trims rpm back on overheat or low oil pressure all support reliable running, and a built-in fitting lets the engine be flushed with fresh water between outings.

Because this is the electric-start tiller build, it suits boats that already carry a battery for other onboard accessories, letting the starter draw off that same bank rather than needing a dedicated pull-cord backup for reliability.

Questions buyers ask

What's the warranty? Three years of coverage applies to pleasure and government use, one year to commercial.

Does it ship with a propeller? Yes, an aluminum propeller along with the tiller handle and fuel tank.

What's the alternator output? 10 amps.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns