In Stock & Ready to Freight Outboard Motors Old stock

2018 Suzuki Marine 15 HP DF15AL EFI Outboard Motor

Brand: Suzuki
Condition: New
Regular price $1,831.56 Save $457.89
Sale price $1,373.67
Sale price ends Mon Nov 30, 11:59 PM PT
+ freight from $185.00, insured LTL, priced by delivery zone (rates)
From $1,558.67 delivered
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The 2018 Suzuki DF15AL EFI is a 15 hp four-stroke built around battery-less electronic fuel injection, among the first systems in this horsepower class able to run EFI without a battery anywhere on board. It is tiller-steered, mounts on a transom recommended at 20 inches, and weighs 108 pounds in this electric-start trim.

Before you order

Line up your transom height with the 20-inch figure Suzuki recommends for this trim; getting that wrong is the most common fitment mistake on a tiller outboard. Throttle and steering both live on the tiller grip, and the engine starts electrically, with a 12-volt system then kept charged while it runs.

Inside the engine

Suzuki's lean-burn control continually adjusts the air-fuel ratio for efficiency, and this 2-cylinder SOHC engine tops out near a recommended 5000-6000 rpm. A 3-blade propeller, 9.25 inches across, does the pushing, and the usual safety net for this class is here too: an over-rev limiter plus a warning if oil pressure drops.

Suzuki packs in a 3.1-gallon tank, its matching fuel line, a printed manual, a spare-style aluminum propeller and a tool kit, and stands behind the motor for three years.

Can this EFI engine run without a battery? Yes, that is how the battery-less system is designed to work.

What transom height should I plan for? 20 inches is the recommended figure for this trim.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns