In Stock & Ready to Freight Outboard Motors Old stock

2017 Yamaha VF250 LA VMAX SHO Outboard Motor

Brand: Yamaha
Condition: New
Regular price $20,965.99 Save $5,241.50
Sale price $15,724.49
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$15,724.49 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

The 2017 Yamaha VF250LA tops out the SHO V6 range at 250 HP at 5,500 RPM, running the same six-cylinder, 60-degree, 4.2-liter block as its siblings. This LA trim carries a 20-inch shaft and 505 lb dry weight.

Tuned at the top of the range

Plasma-fused sleeveless cylinders and a long-track induction system feeding electronic multi-point injection are the backbone of this powerhead, calibrated here for the higher output rating. A single timing belt with an automatic tensioner is designed to hold proper tension without routine adjustment.

Instrumentation and rigging

Optional Command Link gauges can show real-time engine, boat and environmental data in square or round displays for single- or multi-engine rigs. Mounting centers measure 28.6 inches and maximum steering angle is 35 degrees from center. The spark plug spec is LFR6A-11-00-000.

What's the gear ratio and alternator rating? Expect a 1.75:1 final drive and up to 50 amps of charging, with 46 amps already on tap at a 1,000 RPM idle.

How much oil does it take? 6.7 liters (7.1 qt) with the filter fitted.

Tilt and trim range? 66 degrees of tilt, -4 through +16 degrees of trim.

Fuel requirements? Regular unleaded, minimum 89 octane, tolerant of up to a 10 percent ethanol blend.

Cooling is water/thermostatic, starting is electric, and Yamaha's coverage here is three years pleasure, three years government and one year commercial use.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns