In Stock & Ready to Freight Outboard Motors Old stock

2017 Yamaha F225 4.2L Offshore Digital Outboard Motor

Brand: Yamaha
Condition: New
Regular price $13,737.60 Save $3,434.40
Sale price $10,303.20
Sale price ends Mon Nov 30, 11:59 PM PT
Freight included, insured LTL to the continental US (rates)
$10,303.20 delivered to the continental US
  • Palletized and heavy shrink-wrapped for freight
  • LTL carrier delivery with optional liftgate service
  • Ships in 1–2 business days from Los Angeles, CA
  • Transit typically 3–14 business days, continental US
Ask a question about this unit

Need a matched transmission, controls or wiring package? Speak with a parts specialist.

Details & Inspection Notes

Running Yamaha's digital electronics, this 2017 outboard puts 225 hp through a 4.2-liter, 60-degree V6, pulling 70 amps from its alternator while the dry scale lands at 562 lbs on its 25-inch shaft, one of the lighter picks in this larger-displacement V6 lineup.

Controls and steering

A digital helm and matching console wiring are needed for this trim, since it skips cable-and-lever controls entirely; retrofitting an older boat for digital control after the fact is rarely worth the cost compared with choosing the mechanical version instead. The compression ratio here runs 10.3:1, and the gear set reduces at 1.75:1.

Saltwater durability

With a filter in place this block takes 6.3 liters of oil, 6.0 liters bare, fed by DOHC injection with variable camshaft timing and electric starting. Features such as sacrificial anodes, a water-cooled rectifier, and forged pistons are aimed at a full season of saltwater running without major upkeep, and the tilt range on this trim tops out at 67 degrees. Boats moving up from a smaller block onto this one usually need little beyond a transom check and a fresh set of control cables.

Warranty here runs three years of pleasure coverage, matching that for government use, and drops to one year for commercial use. This ships new; confirm your helm wiring and overall rigging with us before ordering.

Startup & Installation Checklist

  • Inspect all external gaskets, seals, spark plugs and timing components prior to installation.
  • Refill engine oil, transmission gear oil and coolant to manufacturer-specified capacities before initial cranking.
  • Prime the lubrication system and verify ECU wiring pinouts, sensors, and ground connections.
  • Startup warranty covers internal lubricated components, cylinder heads, and engine block for 30 days from delivery.

Full terms: 30-day startup warranty · returns